Exceptionally Silent, Accurate and Powerful Smart Direct Drive Trainer
- Improved stillness results in a nearly silent smart bike trainer with power and cadence accuracy within 1%
- New motor design creates enhanced ride feel during climbs and acceleration, when riding at low speed or cadence
- Now enables accurate pedal stroke analysis via compatible third-party software and Edge® bike computers
- Dynamic inertia compensates for weight and other factors to ensure a realistic and smooth ride
- Road feel feature lets you experience the sensation of different road surfaces, such as cobblestone and gravel
Tacx NEO 2T Smart takes the pinnacle of indoor bike training and raises it even higher. With an improved design and revamped components, it provides an immersive experience, wider pedal stroke analysis compatibility and even more improvements that make it one of the most quiet, realistic and accurate bike trainers available.
Newly redesigned magnets make for a significant improvement in the stillness of NEO 2T Smart. Any noise generated from internal air displacement is greatly reduced, as are vibrations that transfer to the floor at low cadence. The result is a smart trainer that’s quieter than ever.
Powerful Climbs and Sprints
The NEO 2T Smart trainer features a new motor design that delivers more power at low speeds, resulting in a highly improved ride feel during a climb or acceleration.
Improved Pedal Stroke Analysis
While NEO 2 Smart was equipped with a capacitive left and right detection sensor that accurately measured the exact position of both your legs, NEO 2T Smart takes pedal stroke analysis to the next level. By adding cycling dynamics with standard ANT+® connectivity, you are now able to analyze your pedal stroke via third-party software, including the software on our Edge® bike computers.
A More Realistic Ride
NEO 2T Smart is designed to simulate an outdoor ride as realistically as possible. It reacts instantly to speed or incline changes and allows for several degrees of movement to the left and right while cycling, following the natural course of your body. It also features dynamic inertia — which controls your mass inertia and compensates for weight, speed and angle of inclination — to make your ride feel as realistic as possible. Use the Tacx software or Zwift app, and experience the road feel feature. It lets the trainer vibrate and simulate the feeling of riding on different road surfaces, such as cobblestone and gravel. And when connected to an external power source, descent simulation accurately simulates a downhill ride.
NEO 2T Smart is able to deliver during the most intense training sessions. Its design integrates 32 neodymium magnets that allow for a high brake force and high power levels. It can resist sprints up to 2,200 watts and simulate climbs up to a 25% incline. And it generates energy from your own cycling movement, meaning there’s no need for an external power source or a plug. No matter how intense your workout, this bike trainer is built to last. The rear axle has also been redesigned, making this trainer compatible with more bikes — without the need for adapters.
Accurate and Reliable
The NEO 2T Smart trainer is designed to provide a reliable, accurate and consistent measurement of your speed, cadence and power, so you can keep track of your performance and progress. This smart trainer doesn’t require calibration, and it measures your data with a maximum deviation of 1%.
The trainer communicates via BLUETOOTH® Smart technology and ANT+ FE-C protocol, making it compatible with a number of popular training apps. Ride a famous cycling route in the Tacx software, take on the virtual worlds of Zwift, or use other platforms such as TrainerRoad. You can also use the trainer in stand-alone mode. When not connected, it will simulate a flat road; the faster you ride, the higher the resistance. Connect to multiple devices simultaneously, so you can enjoy the software while tracking performance on your Garmin bike computer.
Train Your Way
NEO 2T Smart harnesses the innovative power of the Tacx indoor training software. Enjoy your time in the saddle with a library filled with more than 100 high-quality videos that let you experience the rush of riding the steep hills of the Alps or the cobblestone roads of Bologna. Take advantage of efficiently structured training plans, designed for your fitness level to help you meet your unique goals. Race against live opponents, upload GPS data and ride on 3-D maps, create your own workouts based on slope, power, heart rate or FTP, and show off on Strava.
|Electrical requirement||110-240 Volts|
|Power indicator||Multicolor LED, spot on floor|
|Connection indicator (ANT+/BLUETOOTH)||2 LEDs|
|Gear ratio||Chainring set-up: up to 3 sprockets, teeth per sprocket, adjustable between 22 and 53; Rear cassette: up to 12 sprockets, teeth per sprocket adjustable between 11 and 40.|
|Max power||2200 watt|
|Simulation of decent||yes|
|Max torque||88 Nm|
|Max brake force||260 N|
|Mass inertia||Variable to 275.6 lbs (125 kg)|
|Calibration||No calibration needed|
|Footprint||22.6" x 29.5" (575 x 750 mm)|
|Height||21.7" (55 mm)|
|Weight||47.4 lbs (21.5 kg)|
|Wireless communication||ANT+ connectivity, BLUETOOTH wireless technology|
|Control by||Smartphone, tablet, ANT+ bike computers, stand alone, computer connection via ANT+ antenna|
|Output||Speed, cadence, power|
|Read out on||Smartphone, tablet, bike computer, computer
with ANT+ antenna